BIESSE STREAM B1 10.5 SOFT Masina de furniruit softforming

serial number: 36789

Technical specifications:

• total installed power 33 kW; 63A; 50Hz
• panel length - min 150 mm - max 3200 mm
• panel width - min 120 mm - max 3200 mm
• panel height -min 10 mm - max 60 mm
• edge thickness in the roll from 0.30 mm to 3 mm
• workpiece thickness from 10 mm up to 60 mm
• edgebanding strip height - min 15 mm - max 65 mm
• working line height 950 mm
• panel projection from drive belt 50mm
• adjustable feed speed from 10 m/min up to 24 m/min
• motorized height adjustment
• CNI control; display replaced with a flat screen
• anti adhesive spraying device
• joint cutting unit, 2 x motor 5kW; 12.000 rot/min
• edge feeder for roll, edge magazine for two edge rolls
• gluing unit for EVA adhesive, granulated
• 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the desired process
• glue bowl capacity 3 Kg
• pressure unit for straight edges with (1+6) rollers
• there are 5 pre-adjusted support bars for softforming pressure
• snipping unit, 2 x motor
• rough trimming unit, 2 x motor 1,3 kW
• fine trimming unit, 2 x motor 0.65 kW-12.000 rpm
• corner rounding unit, 2 x motor 0,35 kW; 12.000 rot/min
• profile scraper unit
• flat scraping unit
• edge buffing unit, 2 x motor
• software SINTRA
• CE marking