Aukcja Wide Choice, Favourable Prices: Stock Clearance Woodworking

- Xing
- LinkedIn
- Facebook
- Twitter
- E-mail
- WhatsApp
- Kopiuj link

Inne branże SCANTECH XT 30

Topowa pozycja

seria nr 806

1/25

9,500 € Oferta początkowa

1 Obserwujący

€

Włącz automatyczną licytację

21.01.2025 14:04

Zakończenie aukcji

9,500 €

Oferta początkowa

Szczegółowe informacje na temat maszyny

Nazwa

Inne branże SCANTECH XT 30

Numer artykułu

980017

Producent

SCANTECH

Model / Typ

XT 30

Dokumenty

6U_Server_Rack_layout.pdf GENERAL_LAYOUT_ULO3-2500.pdf Bahnriss_Schluesselschalter.pdf CE_Declaration_of_conformity_de_STDE190001.pdf Flexscan_userguide_V2.2.1_de.pdf opc-ua_export_v1.0.pdf serverrack_datasheet.pdf ST00025-Installation_Guide_ULO3_rev_1.2_de.pdf ST00033-ULO3_Maintenance_Manual_rev_1.0_de.pdf ULO3_Electrical_drawing_A.9.pdf

Rok produkcji

2020

Przedmiot dostępny od

immediately

Stan przedmiotu

Lokalizacja

Niemcy, 79379 Müllheim i.M.

Pokaż na mapie
Wszystkie przedmioty tej lokalizacji

Usługi i koszty

opłata aukcyjna: 19 %
Koszt rozbiórki i załadunku (wiążąca): 500.00 €
Cena całkowita: Dodatkowo VAT
Koszty transportu: nie zawiera
Warunki dostawy: FCA Müllheim i.M., załadunek na ciężarówkę
Warunki płatności: 100% zapłata przed odbiorem

Dane techniczne

wymiary montażowe ok. (dł. x szer. x wys.): 3.212 x 290 x 892 mm
Waga ok.: 400 kg

Opis przedmiotu

Measuring device for determining the thickness of flowing goods - measuring head traverses across the web.
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.

Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.

Thickness gauge ULO3-2500, orientation Left-B
Flexscan 6 software
Operator interface
Server rack with replacement server and UPS
Communication interface OPC-UA
Supply voltage: 230V +/- 10%, 50Hz +/- 1%, 20 A, loadable neutral conductor
Electrical design: in accordance with VDE 100 with declaration of incorporation
Documentation: 2 x paper
Documentation language: 2 x German
Material: PVC foil
Thickness: 50µm to 1000µm
Web width: Max. 2100mm
Web speed: max. 200 m/min
Line type: PVC calender
Product tolerance: +/- 5% at 60µm, +/- 3µm
Measuring accuracy: +/- 0.3µm at 60µm
Temperatures:
- Measuring point, sensor: < 45°C
- Operating station: < 45°C

Parts list:

Scanner

Measuring frame ULO3 - 2500 mm
X-Ray sensor greater than 5keV acceleration voltage, max. 15keV

HMI

DELL PC (without mouse, screen and keyboard)

Server rack

1 EATON UPS for bridging power failures
2 server PCs to be able to continue using the other in the event of a failure
1 switch

IO-BOX

4x analog input (2x for your measurement position (4-20mA or 0-10V))
4x Analog Output (statistical variables or mean values can be transmitted here via analog signal) (4-20mA or 0-10V)
8x digital input (e.g. buttons that trigger actions on the scanner can be connected here. E.g. Start Scan, Stop Scan...)
4x digital output (e.g. to control a lamp / horn if, for example, the average value is outside a tolerance)

Small parts

1x rotary encoder (necessary for operation)
3x draw-wire sensor for transferring the material width (optional)
1x key/switch for bypassing a barrier sensor for maintenance purposes

The parts could also be used individually as spare parts storage.

The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany). Pokaż tłumaczenie