Okleiniarka SCM OLIMPIC K 360 T-ER1

ATTENTION: PLC is defective, not functional 

• serial number AB00000504 
• height of panel to be machined: 8 - 58 mm 
• thickness 10 to 45 mm with use of rounding tool 
• length of panel to be clad: 210 to 2500 mm 
• minimum width of panel to be machined: 90 to 1100 mm 
• roll edge thickness:
  • 0.4 to 3 mm without rounding
  • max 3 mm with rounding 
• strip edge thickness:
  • max 6 mm without rounding
  • max 3 mm with rounding 
• edge width: panel thickness +2mm on each side 
• drive (feed speed): 11 m/min 
• workpiece spacing: 600 mm 
• part protrusion from transfer chain (panel protrusion): 30 mm 
• grinder motors: 2 x 2 kW 
• cutting motors: 2 x 0.19 kW 
• up/down motor: 0.30 kW  
• drive motor: 1.1 kW 
• milling motor group: 2x 0.65 kW 
• power supply: 380 V
• three-phase 50 Hz 
• pneumatic supply: 8-10 bars (max)
• dry air suction: 1x Ø100 and 5x Ø80 mm