HOMAG KAL 610/23/DE Single Edgebander

Applied edge type: Thin edge/Thickness, Solid wood
EVA PUR
bonding system Max. feed speed 40 m/min
Maximum panel thickness 60 mm
Panel height 8 - 60 mm
Width min. of the panel 85 mm
Edge thickness 0.4-12 mm
Max. feed speed 40 m/min
Upper pressure with rubberized
belt Panel support guide with panel introduction system in square
OPERATING UNITS SQUARING PART 1
Grinding unit with automatic
intervention motor power 4 KW - 8.640 RPM
Lamps to heat the edge
9-place
reel magazine Gluing system with tank and pre-melter for hot-melt glue and PUR
Edge pressure roller unit with 7+7 rollers and NC
positioning OPERATING UNITS IN THE EDGEBANDING PART 1
Overlapping trimming unit with 2 motors
OPERATING UNITS IN THE EDGEBANDING PART 2
HL 84 trimming unit with 2 motors
Maximum processing speed: 25 m/min
Motor power: 0.8 KW - 12.000 RPM
OPERATING UNITS IN THE EDGEBANDING PART 3
MF 21 gleaning trimming unit with 2 motors and NC
positioning motor power: 0.55 KW - 11.360 rpm
OPERATING UNITS IN THE EDGEBANDING PART 4
FK 31 rounding unit with 1 motor and NC
positioning Maximum processing speed: 20 m/min
Motor power: 0.75 KW - 12.000 RPM
OPERATING UNITS IN THE EDGEBANDING PART 5
MN 21 edge scraper unit with NC
positioning OPERATING UNITS IN THE EDGEBANDING PART 6
FA 10
glue scraper unit OPERATING UNITS IN THE EDGEBANDING PART 7
Brush unit with 2 motors of 0.25 kW
Sprayer
unit Units mounted on overboards
POWER CONTROL PC 22
control system Barcode
label reader CE marked safety regulations