MAZAK VTC 300C- TYPE II Vertical Machining Center

with chip conveyor, ejection on the left
side Hours: 38499
Control Mazatrol 640M
Tool magazine for 48 tools
Workbench
Table size (clamping surface): 760 x 2,000 mm
Table load: max. 1,400 kg
Table configuration: 5 x 18mm T-slots, 125mm spacing
Reference T-Groove: In the middle of the table 18 H mm
Table height from the floor: 875 mm
Traversing Ranges
Travel : X-axis 1740 mm, Y-axis 760 mm, Z-axis 660 mm
Rapid traverse speed: X-axis 36 m/min, Y-axis 36 m/min, Z-axis 36 m/min
Feed rate 1 - 8,000 mm/min
Distance spindle nose to table 180 - 840 mm
Distance between the front of the stand and the centre of the spindle 830 mm
Working spindle speed range (infinitely variable) 40 - 12,000 in-1
Steep cone mount: CAT 40
Main drive power, AC motor: 18.5 / 11 / 7.5 kW
Torque: max. 98 Nm
Cutting performance (test results)
Milling capacity C 45, approx. 416 ccm/min
Drilling capacity C 45, Ø 25 mm
Threading C 45, M 24 x 3
The machining performance depends on the condition of the workpiece, the tooling and the clamping device.
Coolant Setup
Fuel tank capacity: 365 l
Flood cooling:
Flow rate of the pump approx. 24 I/min
Pressure at the pump: approx. 5 bar
- Air blowing device on the spindle
- High-pressure cooling by the spindle, pressure approx. 15 bar
- Preparation for Mazak Monitoring System B, optical, type probe MP-12
- 2 additional M-functions sets, (2 M-functions per set) partition wall for pendulum machining
- Mazak Monitoring System B, optical type probe MP-12 CNC•Option package "Performance"
- 15 pcs Wiper No.: J09KXSW10S0