WEEKE VANTAGE 24 L Machining centre with NESTING table
- Lot:
- A7-29607-6
- Marene, IT
Colectare pe bază de programare
- Oferta curentă
- Stare
Activați Auto-Bid
Recomandat
Despre acest lot
Type of Machining Drilling and Milling
X-axis working area 3700 mm
Y-axis working area 1550 mm
Main electrospindle power 9 KW
Number of axes controlled 3 axes
Total number of drilling spindles 7
Total number of tool change position 8
X-axis working area 3700 mm
X axis travel 4538 mm
Y-axis working area 1550 mm
Y-axis travel 1952 mm
Maximum workpiece throughput 100 mm
X-axis travel speed 96 m/min
Y-axis travel speed 96 m/min
Z-axis travel speed 25 m/min
Nr. 1 Bakelite
nesting worktop Width 3700 mm
Length 1550 mm
Nr. 4 Vacuum
Pumps Single capacity 108 m³/h
Drilling Operator Group 1
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 7
Total number of vertical + horizontal spindles: 7
Milling operating units 1
MILLING OPERATING UNITS 1
Group: Top
No. of axes checked: 3
Automatic tool changer: yes
Motor power: 9 kw
RPM: 24000 RPM
TOOL MAGAZINE 1
No. of positions: 8
positioned on the side of the machine
PC85
Control System WoodWOP
Machine Programming Software CE marked safety regulation yes
Safety system Safety photocells
Total installed power 26 KW
UTENSILS NOT INCLUDED
X-axis working area 3700 mm
Y-axis working area 1550 mm
Main electrospindle power 9 KW
Number of axes controlled 3 axes
Total number of drilling spindles 7
Total number of tool change position 8
X-axis working area 3700 mm
X axis travel 4538 mm
Y-axis working area 1550 mm
Y-axis travel 1952 mm
Maximum workpiece throughput 100 mm
X-axis travel speed 96 m/min
Y-axis travel speed 96 m/min
Z-axis travel speed 25 m/min
Nr. 1 Bakelite
nesting worktop Width 3700 mm
Length 1550 mm
Nr. 4 Vacuum
Pumps Single capacity 108 m³/h
Drilling Operator Group 1
DRILLING OPERATOR UNIT 1
Group: Top
Spindles for vertical drilling: 7
Total number of vertical + horizontal spindles: 7
Milling operating units 1
MILLING OPERATING UNITS 1
Group: Top
No. of axes checked: 3
Automatic tool changer: yes
Motor power: 9 kw
RPM: 24000 RPM
TOOL MAGAZINE 1
No. of positions: 8
positioned on the side of the machine
PC85
Control System WoodWOP
Machine Programming Software CE marked safety regulation yes
Safety system Safety photocells
Total installed power 26 KW
UTENSILS NOT INCLUDED
- Numărul lotului:
- A7-29607-6
- Locație:
- Marene, IT
- Vândut de catre:
- Vânzător companie
Specificațiile lotului
- Cantitate
- 1
- Marjă
- Nu
- Marca
- WEEKE
- Anul de construc?ie
- 2010
- Condiții de livrare
- Încărcat pe camion
Documente
Atenție, vă rog!
Demontare și încărcare în camioane (costuri obligatorii)
Toate articolele sunt vândute în stare neverificată
Date de preluare: 5.05.2025 până la 09.05.2025
2.590 kg
CO₂e
Atât de mult poți economisi la emisiile de dioxid de carbon dacă alegi să cumperi acest produs folosit, în loc de unul nou.Pentru comparație, un zbor Berlin - Lisabona corespunde cu 169 kg CO₂e per pasager.
