Отличное предложение
номер лота 806
9 500 €
1 наблюдатель
Войти для участия в аукционах
€
Выбрать аукционного агента
плюс комиссия и НДС
21.01.2025 14:04
Время закрытия
9 500 €
Стартовая цена
Информация о станке
- Имя
- Другие отрасли SCANTECH XT 30
- Номер артикула
- 980017
- Производитель
- SCANTECH
- Модель / Тип
- XT 30
- Документы
- 6U_Server_Rack_layout.pdf GENERAL_LAYOUT_ULO3-2500.pdf Bahnriss_Schluesselschalter.pdf CE_Declaration_of_conformity_de_STDE190001.pdf Flexscan_userguide_V2.2.1_de.pdf opc-ua_export_v1.0.pdf serverrack_datasheet.pdf ST00025-Installation_Guide_ULO3_rev_1.2_de.pdf ST00033-ULO3_Maintenance_Manual_rev_1.0_de.pdf ULO3_Electrical_drawing_A.9.pdf
- Год выпуска
- 2020
- Товар можно забрать
- immediately
- Состояние товара
- Место
-
Германия, 79379 Müllheim i.M.
- Показать на карте
- Все позиции в этом месте
Затраты и выгоды
- 19 %
- 500,00 €
- Общая сумма
- плюс НДС
- Стоимость транспортировки
- Не включено
- условия поставки
- FCA Müllheim i.M., погрузка на грузовик
- условия оплаты
- 100% расчет в форме инкассо
Технические характеристики
- размеры в собранном виде (Д/Ш/В)
- 3.212 x 290 x 892 мм
- Приблизительный вес
- 400 кг
Описание товара
Measuring device for determining the thickness of flowing goods - measuring head traverses across the web.
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
Scanner
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
The system is configured so that the web width (knife position) is read in via sensors. Further signals for process control can be transferred via the I/O box.
Settings for PVC film in the calendering process with thicknesses of 60µm - 1000µm, but can also be used for other materials.
The specific application should be clarified with the manufacturer Scantech, as well as support during commissioning of the system.
- Thickness gauge ULO3-2500, orientation Left-B
- Flexscan 6 software
- Operator interface
- Server rack with replacement server and UPS
- Communication interface OPC-UA
- Supply voltage: 230V +/- 10%, 50Hz +/- 1%, 20 A, loadable neutral conductor
- Electrical design: in accordance with VDE 100 with declaration of incorporation
- Documentation: 2 x paper
- Documentation language: 2 x German
- Material: PVC foil
- Thickness: 50µm to 1000µm
- Web width: Max. 2100mm
- Web speed: max. 200 m/min
- Line type: PVC calender
- Product tolerance: +/- 5% at 60µm, +/- 3µm
- Measuring accuracy: +/- 0.3µm at 60µm
- Temperatures:
- Measuring point, sensor: < 45°C
- Operating station: < 45°C
Scanner
- Measuring frame ULO3 - 2500 mm
- X-Ray sensor greater than 5keV acceleration voltage, max. 15keV
- DELL PC (without mouse, screen and keyboard)
- 1 EATON UPS for bridging power failures
- 2 server PCs to be able to continue using the other in the event of a failure
- 1 switch
- 4x analog input (2x for your measurement position (4-20mA or 0-10V))
- 4x Analog Output (statistical variables or mean values can be transmitted here via analog signal) (4-20mA or 0-10V)
- 8x digital input (e.g. buttons that trigger actions on the scanner can be connected here. E.g. Start Scan, Stop Scan...)
- 4x digital output (e.g. to control a lamp / horn if, for example, the average value is outside a tolerance)
- 1x rotary encoder (necessary for operation)
- 3x draw-wire sensor for transferring the material width (optional)
- 1x key/switch for bypassing a barrier sensor for maintenance purposes
The parts could also be used individually as spare parts storage.
The system must be approved by the authorities, and an independent inspection must also be carried out by an X-ray expert before official commissioning.
One (or two) employees must be trained as radiation protection officers in accordance with specialist knowledge R3 (within Germany).
Автоматический перевод
Детали аукциона
- Название аукциона
- Wide Choice, Favourable Prices: Stock Clearance Woodworking
- номер лота
- 806
- Документы
- Специальные условия аукциона
- Осмотр
-
Точное местонахождение товара предоставляется по запросу.
The items are in different locations (see item description). Viewing by appointment only!
Leon Quentin Project Manager
Наши услуги
- Персональный сервис на 16 языках
- Консультации на месте и консультации экспертов
- При необходимости организация доставки
- Помощь в документальном и таможенном оформлении