Najboljša izbira
serijska št. 58
6,200 €
Za oddajo ponudbe se prijavite
€
Nastavitev dražbenega agenta
+ dražbena provizija in DDV
23.01.2025 11:56
Čas zaključka
6,200 €
Izklicna cena
Podrobnosti stroja
- Ime
- ARTECH AKRON 860 Robna lepilka
- Številka izdelka
- 986177
- Proizvajalec
- ARTECH
- Model / Vrsta
- AKRON 860
- Leto izdelave
- 2006
- Izdelek na voljo od
- Immediately
- Kakovost izdelka
- Lokacija
-
Portugalska, 4580-369 Duas Igrejas
- Prikaži na zemljevidu
- Vsi izdelki na tej lokaciji
Cena in ugodnosti
- 19 %
- 1,000.00 €
- Končna cena
- plus DDV
- Cena prevoza
- ne vsebuje
- Pogoji dostave
- FCA Duas Igrejas, naloženo na dostavno vozilo
- Pogoji plačila
- 100% plačilo pred prevzemom
- Varščina
Tehnične podrobnosti
- približne mere postavitve (d x š x v)
- 7,500 x 1,500 x 1,800 mm
- Približna teža
- 3,800 kg
Opis izdelka
• Edgebander
• Serial number 64421
• Total installed power 22 KW
• Edge thickness in strips from 0.40 mm to 22 mm
• Edge thickness in roll from 0.40 mm to 3 mm
• Worpiece thickness from 10 mm to 60 mm
• Minimum workpiece lenght 140 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed
• Motorized height positioning
• CNI PC Control
• FI-701 joint trimming unit, 2 x motor 1.80 KW
• Edge feeder for strips and roll, edge magazine for one edge coil
• VC-710 gluing unit with pot for granulated hot melt adhesive, with QM-701 premelting unit
• Pressure group with (1+5) rollers
• IN-701V end trimming unit, tilting to 15°
• RI-701 fine trimming unit, tilting to 45°
• CR-401 profile trimming unit, 4 x motor
• RB-701 scraping unit
• TF-700 milling group, tilting from 0° to 90°, motor 1.80 KW-12000 rpm
• SP-700 edge buffing unit
• PH-700 hot air blower unit
• Serial number 64421
• Total installed power 22 KW
• Edge thickness in strips from 0.40 mm to 22 mm
• Edge thickness in roll from 0.40 mm to 3 mm
• Worpiece thickness from 10 mm to 60 mm
• Minimum workpiece lenght 140 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed
• Motorized height positioning
• CNI PC Control
• FI-701 joint trimming unit, 2 x motor 1.80 KW
• Edge feeder for strips and roll, edge magazine for one edge coil
• VC-710 gluing unit with pot for granulated hot melt adhesive, with QM-701 premelting unit
• Pressure group with (1+5) rollers
• IN-701V end trimming unit, tilting to 15°
• RI-701 fine trimming unit, tilting to 45°
• CR-401 profile trimming unit, 4 x motor
• RB-701 scraping unit
• TF-700 milling group, tilting from 0° to 90°, motor 1.80 KW-12000 rpm
• SP-700 edge buffing unit
• PH-700 hot air blower unit
Samodejni prevod
Podrobnosti dražbe
- Ime dražbe
- Closure of 2 Carpentry Shops
- serijska št.
- 58
- Dokumenti
- Posebni pogoji dražbe
- Pregled
-
Točen naslov vam sporočimo glede na zanimanje.
Viewing by appointment only!
For the inspection, please contact Pedro Carriço:
pedro.carrico@surplex.com
Naše storitve
- Osebne storitve v 16 jezikih
- Svetovanje na lokaciji in s strani strokovnjakov
- Po potrebi organizacija prevoza
- Pomoč pri urejanju papirjev in carine