Dražba Machinery and Accessories (Metalworking) TRUMPF, HERMLE, SCHIESS, DMG MORI, TOS - Eastern Europe
CNC stružnica DOOSAN LYNX 2100LYSB
Nasvet
serijska št. 67
56,000 €
7 ponudbe 44 opazovalcev
Za oddajo ponudbe se prijavite
€
Nastavitev dražbenega agenta
+ dražbena provizija in DDV
Konča se čez 1d 5h
Čas zaključka
56,000 €
Trenutna najvišja ponudba
Podrobnosti stroja
- Ime
- CNC stružnica DOOSAN LYNX 2100LYSB
- Številka izdelka
- 969014
- Proizvajalec
- DOOSAN
- Model / Vrsta
- LYNX 2100LYSB
- Leto izdelave
- 2022
- Izdelek na voljo od
- immediately
- Kakovost izdelka
- Lokacija
-
Slovenija, 4221 Škofja Loka
- Prikaži na zemljevidu
- Vsi izdelki na tej lokaciji
Cena in ugodnosti
- 19 %
- 1,750.00 €
- Končna cena
- plus DDV
- Cena prevoza
- ne vsebuje
- Pogoji dostave
- FCA Škofja Loka, naloženo na dostavno vozilo
- Pogoji plačila
- 100% plačilo pred prevzemom
Tehnične podrobnosti
- premer struženja
- 300 mm
- Dolžina struženja max.
- 510 mm
- serijska številka
- ML0406-000788
- hod - x
- 205 mm
- hod y
- 105 mm
- hod z
- 560 mm
- Odčitane obratovalne ure
- 15,386 h
- Vključno z opremo
- Da
- upravljanje
- FANUC 0T PLUS
- izvrtina vretena
- 67 mm
- območje števila vrtljajev
- 4,500 1/min
- Približna teža
- 4,500 kg
- približne mere postavitve (d x š x v)
- 2,900 x 1,800 x 2,100 mm
Opis izdelka
- serial number: ML0406-000788
- operating hours: approx. 15386 hrs.
- control: FANUC 0T PLUS
- 15-inch monitor - touch panel
- Memory: 2MB
- max. turning length: 510 mm
- max. turning diameter: 300 mm
- turning diameter over face slide: 600 mm
- turning diameter over bed slide: 600 mm
- turning diameter over top slide: 210 mm
- max. workpiece weight: 150 kg
- max. spindle speed: 4500 rpm
- spindle bore: 67 mm
- bar diameter: 67 mm
- travels:
- X-axis: 205 mm
- Y-axis: 105 mm
- Z-axis: 560 mm
- rapid traverse:
- X-axis: 30 m/min.
- Y-axis: 10 m/min.
- Z-axis: 36 m/min.
- main spindle with 3-jaw chuck: 10 mm / 8"
- Main spindle: 4,500 min-1]
- P = 15/15/11 kW
- m(max) = 169 Nm
- 3-jaw chuck lower spindle: 135 mm / 5"
- lower spindle: 6,000 rpm
- P = 5.5/5.5/3.7 kW
- m(max) = 47 Nm
- turret - 12 PO/24 INDEX BMT45
- standard tooling: 8x
- tool stand: 2x
- axially driven tool: 2x
- angle-driven tool
- automatic tool measuring hand: RENISHAW
- high pressure pump: #1 5.0 bar - 50 Hz/1.8 kW
- panel filter system:
- Filtration: 20 μm
- Flow rate: 30 l/min
- normal pressure pump: #2 2.0 bar
- high pressure pump #3 12.0 bar with special valve system for continuous operation between tool changes
- part ejection system through the counter spindle
- water cooling through counter spindle
- CNC Autodoor
- oil separator
- parts collector with drawer
- parts collector with conveyor system and bar feeder interface
- DOOSAN axis overload system (measuring system)
- automatic shutdown function
- aignal tower light
- robot interface
- coolant level sensor
- chip conveyor system
- LOSMA air filter system with separating effect
- water spray gun with electronic control
- included in the scope of delivery:
- 3-jaw chuck main spindle
- 3-jaw chuck counter spindle
- 7 x tool holders (2 ID, 3 OD, 1 linear drive, 1 angular drive)
- parts conveyor
- LNS chip conveyor
- LOSMA fume extraction system
- high pressure pump 14 bar
- all other items shown in the pictures are not included in the scope of delivery
- available from 02.12.2024
Samodejni prevod
Podrobnosti dražbe
- Ime dražbe
- Machinery and Accessories (Metalworking) TRUMPF, HERMLE, SCHIESS, DMG MORI, TOS - Eastern Europe
- serijska št.
- 67
- Dokumenti
- Posebni pogoji dražbe
- Pregled
-
Točen naslov vam sporočimo glede na zanimanje.
No fixed date. The items are at different locations (see item description).
Viewing by appointment only!
Naše storitve
- Osebne storitve v 16 jezikih
- Svetovanje na lokaciji in s strani strokovnjakov
- Po potrebi organizacija prevoza
- Pomoč pri urejanju papirjev in carine