EDEL STANZTEC Profilmatic 680 pipe punching machine

Punching force: 600 kN
maximum stroke rate approx. 50/min^-1
Feed length: 8100mm
max. lifting height: 130mm
max. positioning speed X direction: 65m/min
smallest programmable distance: 0.1mm
Position deviation in the division range: +/-0.2mm
Position deviation on total length: +/- 0.4mm

The system is still in operation and can be demonstrated.
Electrical circuit diagram, pneumatic and hydraulic diagram available.
Operating instructions etc. available.

The system should be uninstalled by mid/end of December 2024.

Packages:
Lifting table for pipe packages 6000mm x 1100mm x 600mm 1000 kg
Roller conveyor in front of machine 6000mm x 600mm x 900mm 100 kg
Press (lying on the back) 3100mm x 1100mm x 2000mm 7500 kg
Rear roller conveyor & feed 8600mm x 1100mm x 1200mm 1000 kg
Scrap conveyor long 10000mm x 300mm x 700mm 200 kg
Scrap conveyor inclined 1600mm x 600mm x 1200mm 250 kg
Gallows control 2200mm x 700mm x 2400mm 200 kg
Cooler on Euro pallet 1200mm x 800mm x 1000mm 200 kg
Control cabinet 1200mm x 800mm x 1900mm 400 kg
Tools and accessories 1 1200mm x 800mm x 1000mm 500kg
Tools and accessories 2 1200mm x 800mm x 1000mm 500kg
Hydraulic unit 900mm x 1200mm x 2100mm 500 kg Prikaz prevoda