HOMAG AND LIGMATECH KAL310/8/A20/S2 Edge bander with Boomerang

Najboljša izbira

serijska št. 1

1/42

Dražba je končana

Vas zanima ta artikel?
Vprašajte za nezavezujočo ponudbo

Podrobnosti stroja

Ime

HOMAG AND LIGMATECH KAL310/8/A20/S2 Edge bander with Boomerang

Številka izdelka

926783

Proizvajalec

HOMAG AND LIGMATECH

Model / Vrsta

KAL310/8/A20/S2

Leto izdelave

2003

Izdelek na voljo od

immediately

Kakovost izdelka

Lokacija

Švedska, 696 32 Askersund

Prikaži na zemljevidu
Vsi izdelki na tej lokaciji

Cena in ugodnosti

Cena demontiranja in nalaganja (binding): 100.00 €
Cena prevoza: ne vsebuje
Pogoji dostave: FCA Askersund, naloženo na dostavno vozilo
Pogoji plačila: 100% plačilo pred prevzemom

Tehnične podrobnosti

upravljanje: NC21
približne mere postavitve (d x š x v): 13,600 x 2,450 x 2,600 mm
Približna teža: 8,000 kg

Opis izdelka

Edgebander with return system

Equipped with the following units:

10-place moulding magazine
Cutter unit
Fine milling unit
Radius milling unit
Corner rounding unit
Profile milling unit
Scraper unit
Polishing unit

Technical data:

Homatic electronic control Feed unit: NC21
Operation Windows
Feed rate: 18 m/min
Working height of the machine: 950 mm
Workpiece width: min.55 mm, max 100 mm
Workpiece overhang: 30 mm
Workpiece thickness: 12 - 60 mm
Edge material thickness (mouldings): 0.4 - 20 mm
Max. cross section: 900 mm²
Edge material thickness (roll): 0.3 - 3.0 mm
Max. cross-section: for PVC 135 mm², for veneer 100 mm²
Roll diameter: max 830 mm
Pneumatic connection: 7-8 bar
Joint milling unit (milling cutters not included) for milling the working edge before the gluing part.
Workpiece preheating for heating the edge before glue application
Gluing unit 2158
Melting unit with granulate container
Electronic temperature control with LED
Magazine for solid moulding
Fixed lengths and roll moulding Infeed of fixed lengths with vacuum suction cup
Shears for roll material
Pressure zone C
Cutting unit HL 83 phase and straight cutting for cutting moulding overhangs at the front and back
3209 Pre-milling unit 1.5 kW
Height adjustment with overpressure. The motors work in co-fed mode
3220 Multi-milling unit For bevelling of different edges up to max. 3 mm thickness and radius milling R=2 and R=3 with a combination tool
3216 Fine milling unit (2x)
3503 Form milling unit FF12 below/above 0.4 kW (milling cutters not included) for rounding of postforming parts and rounding of corners in crossfeeding of both
4508 Multi-sickling unit MN 21 automatic For max. 3 different profiles
Copying above below and on the side for bevel or radius beading of pre-profiled PVC edgings 4506 Finishing unit FA 11 top / bottom
For processing edge along over / under consisting of: Beading unit glue joint for glue removal 6275 Electronic height adjustment
Hand pulpet for setting work LIGMATECH return conveyor ZHR 05/L/095 Optimum use: The return conveyor enables one-man operation of single-sided edgebanders
Remote operation from the infeed of the edgebander
Workpiece parameters: Length max. 2 500 mm, Length min. 300 mm, Width max 800 mm, Width min. 60 mm (at 40 mm workpiece overhang)
Thickness max. 60 mm
Thickness min. 8 mm
Weight max. 50 kg