HOMAG KL 78 A 20 Robna lepilka
Podrobnosti stroja
- Ime
- HOMAG KL 78 A 20 Robna lepilka
- Številka izdelka
- 958679
- Proizvajalec
- HOMAG
- Model / Vrsta
- KL 78 A 20
- Videoposnetki
-
Video 1 - Leto izdelave
- 1996
- Izdelek na voljo od
- Immediately
- Kakovost izdelka
- Lokacija
-
Portugalska, 4615-047 Freixo de Cima
- Prikaži na zemljevidu
- Vsi izdelki na tej lokaciji
Cena in ugodnosti
- 2,700.00 €
- Cena prevoza
- ne vsebuje
- Pogoji dostave
- FCA Freixo de Cima, naloženo na dostavno vozilo
- Pogoji plačila
- 100% plačilo pred prevzemom
Tehnične podrobnosti
- približne mere postavitve (d x š x v)
- 9,900 x 1,700 x 1,850 mm
- Približna teža
- 8,500 kg
Opis izdelka
• Edgebander
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
• Serial number 0-200-13-2735
• Edge thickness in strips from 0.40 mm up to 12 mm
• Edge thickness in roll from 0.30 mm up to 3 mm
• Worpiece thickness from 12 mm up to 60 mm
• Minimum workpiece width 85 mm
• Adjustable feed speed from 18 m/min up to 24 m/min
• Feed motor 1.10 kW
• HOMATIC control
• Edge feeder for strips and roll, edge magazine for one edge coil
• A20 gluing unit with pot for granulated hot melt adhesive
• Pressure group with (1+6) rollers
• End trimming unit, 2 motors
• Rough trimming unit, 2 motors
• Fine trimming unit, 2 tilting motors
• Profile trimming unit, 4 x motor 0.40 kW, 12000 rpm
• Milling group tilting from 0° up to 90°, motor 5 kW-11500 rpm
• Flat scraping unit
• Profile scraping unit
• Sanding belt unit
• Edge buffing unit, 2 motors
Samodejni prevod
Neposredna prodaja
Pedro Carriço
na povpraševanje
Cena
Pedro Carriço
Naše storitve
- Storitve demontaže in ponovne montaže
- Svetovna logistična mreža
- Individualno svetovanje
- Pomoč pri urejanju papirjev in carine