SUMITOMO DEMAG SYSTEC 210/580-840 Injection moulding machine
Najboljša izbira
serijska št. 5
4,900 €
15 opazovalcev
Za oddajo ponudbe se prijavite
€
Nastavitev dražbenega agenta
+ dražbena provizija in DDV
28.11.2024 14:04
Čas zaključka
4,900 €
Izklicna cena
Podrobnosti stroja
- Ime
- SUMITOMO DEMAG SYSTEC 210/580-840 Injection moulding machine
- Številka izdelka
- 967473
- Proizvajalec
- SUMITOMO DEMAG
- Model / Vrsta
- SYSTEC 210/580-840
- Leto izdelave
- 2012
- Izdelek na voljo od
- immediately
- Kakovost izdelka
- Lokacija
-
Nemčija, 04746 Hartha
- Prikaži na zemljevidu
- Vsi izdelki na tej lokaciji
Cena in ugodnosti
- 19 %
- 500.00 €
- Končna cena
- plus DDV
- Cena prevoza
- ne vsebuje
- Pogoji dostave
- FCA Hartha, naloženo na dostavno vozilo
- Pogoji plačila
- 100% plačilo pred prevzemom
Tehnične podrobnosti
- približne mere postavitve (d x š x v)
- 7,000 x 2,000 x 2,100 mm
- Približna teža
- 9,000 kg
Opis izdelka
Machine number: 80330117
Operating voltage: 3 x 400 V
Frequency: 50 Hz
Rated current: 178 A
Control system: SUMITOMO DEMAG
Closing force: 2100 kN
Locking force: 2310 kN
Opening stroke: max. 575 mm
Mould installation height: min. 340 mm
Mould installation height: max. 690 mm
Screw diameter: 60 mm
Injection pressure: 1351 bar
Stroke volume: 636 cm³
Injection part weight: 579 g
Nozzle travel: max. 460 mm
Max. Distance between the mould mounting platens: 1265 mm
mould mounting platens: 860 x 860 mm
Distance between lights and columns: 580 x 580 mm
Max. Mould weight: 3300 kg
Max. Weight of moving mould platen: 2000 kg
Max. Weight of fixed mould platen: 2500 kg
Ejector travel: 180 mm
Ejector force: 73 kN
Ejector retraction force: 630 kN
Dosing path: max. 225 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 110 kN
Operating voltage: 3 x 400 V
Frequency: 50 Hz
Rated current: 178 A
Control system: SUMITOMO DEMAG
Closing force: 2100 kN
Locking force: 2310 kN
Opening stroke: max. 575 mm
Mould installation height: min. 340 mm
Mould installation height: max. 690 mm
Screw diameter: 60 mm
Injection pressure: 1351 bar
Stroke volume: 636 cm³
Injection part weight: 579 g
Nozzle travel: max. 460 mm
Max. Distance between the mould mounting platens: 1265 mm
mould mounting platens: 860 x 860 mm
Distance between lights and columns: 580 x 580 mm
Max. Mould weight: 3300 kg
Max. Weight of moving mould platen: 2000 kg
Max. Weight of fixed mould platen: 2500 kg
Ejector travel: 180 mm
Ejector force: 73 kN
Ejector retraction force: 630 kN
Dosing path: max. 225 mm
Nozzle immersion depth: 20 mm
Nozzle contact pressure: 110 kN
Samodejni prevod
Podrobnosti dražbe
- serijska št.
- 5
- Dokumenti
- Posebni pogoji dražbe
- Pregled
-
Točen naslov vam sporočimo glede na zanimanje.
04746 Hartha and 04680 Colditz, Germany
- address on request only -
Viewing by prior appointment only!
Please book a binding inspection appointment stating the lot number/s via awa@surplex.com!
- Prevzem
-
Torek, 10.12.2024 do
Petek, 13.12.2024, od 08:00 Ura do 16:00 Ura
Naše storitve
- Osebne storitve v 16 jezikih
- Svetovanje na lokaciji in s strani strokovnjakov
- Po potrebi organizacija prevoza
- Pomoč pri urejanju papirjev in carine